CSlogo1.gif (9302 bytes)

AGILENT 1100, 1200, 1260, 1290 Infinity & WATERS Brand HPLC DEGASSER / DEGASSING MODULE PARTS and REPAIRS:

G1322-66500, 5067-4734, 5067-4795, G1379-60001, G1379-60011, 5067-4798, G1322-60001, 5067-5383, 5067-5387, 9000-1563, 700001352, 700001218, 700003753, 700001220, 700001219, 700001220, 9000-1004, 9000-1184, G1379-66500, G4225-60500, G4280-60070, G1311-60070, 5062-8580, 5065-9990, G1322-60002, G1311-67302, G1379-67300, G1379-67310, 5062-8579, 5065-9989, 5065-9981, 5067-1531, G1311-67600,  G1322-60003, G1379-60003, G1322-67300, 5067-4734, 5067-4795, G1379-60001, G1379-60011, 5067-4798, G1322-60001, 5067-5383, 5067-5387, G1311-60007, G1311-60007, 5067-4796, G1322-60000, G1379-60000.

Degasser Repair Services and Parts Available :

  • We provide repair services and parts for all of the Agilent and HP model G1322A, G1379A, G1379B and G4225A stand alone degasser modules as well as the integrated degassers found in the 1260 and 1290-series pumps (e.g. G1311B, G1311C, G1312B, G1312C, G4204A, G4220A, G4220B, G7104, G7120A). These modules most commonly fail after five years of normal use. Failure of the degassing system should be addressed quickly as a degasser which does not meet the manufacturers operating specification may put your entire HPLC system out of compliance or validation.

  • We have higher quality, lower cost degasser parts for many Waters and Shimadzu brand systems too. We can supply the factory vacuum pumps, upgraded vacuum chambers and/or kits to repair or upgrade your broken HPLC degasser.

    Save Money: Our repair prices are far less than what others charge.

  • We use the exact same parts that Agilent does (and offer optional higher quality parts too) and can often inexpensively "repair" systems (vs. replacing complete modules at a far higher cost), which Agilent and other companies can not do. We can also optionally customize and upgrade the degassing module's performance using the latest technology smaller volume vacuum chambers to reduce delay volume, flushing and solvent change-over times without decreasing vacuum degassing capacity. The diagnosis, repair and testing services are all done in our shop by experienced professionals. *All of these repairs and/or services can be done for a fraction of the price charged by Agilent Technologies and other vendors.

  • Professional Diagnostic Testing of your Degassing Module

  • Repair, Cleaning and/or Replacement of Defective Parts

  • Optional Low Volume Vacuum Chambers Available

  • Optional Higher Performance Vacuum Pump Upgrades

  • Complete Retrofit Upgrades with Better Performance for the G1322A

  • Option for Professionally Refurbished Parts to Save You Money

  • Replacement of Complete Flow Path for Contaminated Systems

  • Degasser Repair Services for Waters, Thermo, Dionex, Shimadzu, ERC & Phenomenex brand systems too

  • Lowest Prices, Highest Quality & Quick Repair Turnaround Times

  • Parts For Sale: Vacuum Pumps, Solenoids, Vacuum Chambers, Control Boards

When you send your Agilent, HP or other brand HPLC degassing module to Chiralizer Services, we will correctly determine which parts of your degasser are defective and send you a formal quotation to replace the defective parts and test the system. We do charge a nominal diagnostic fee to evaluate, clean and test your degasser, but you retain control over the decision to have it repaired or not. Sometimes a cleaning is all it needs. Please give us a call or send us an email to discuss your needs and we can forward you a diagnostic quote with shipping return instructions. Note: For the fastest response, please send us an email which includes your full name, company name, full address, phone #, Degasser Model #, Degasser Serial Number.

G1322A-View.JPG (74937 bytes)G1379A-View.jpg (75940 bytes)Waters_Bracket_with_Chambers-1.jpg (54257 bytes)G1322A-Sol-1.jpg (385872 bytes)

WB01343_.gif (599 bytes)

Chiralizer™ Services, LLC,   USA

Email:    Sales@HPLCTOOLS.com

© Copyright 2020, Chiralizer™ Services, LLC. All Rights Reserved.